Tips to Choose the Best Commercial Roof for Your Building in Atlanta

EPDM roofing Atlanta

The humid subtropical climate of Atlanta comes with four distinct seasons and lots of precipitation the year around. These special climate conditions expose local roofs to special conditions and challenges, which also means that the materials used on local roofs need particular qualities. Here are some of the most common choices for commercial roofs in the city:

  • Metal – available in a variety of alloy versions, the metal sheets and panels used for making flat roofs are popular due their affordability, easy installation and low maintenance needs. Metal roofs are also very durable, giving the commercial facilities they are installed on adequate protection for around 30-40 years.
  • Membranes – Economical EPDM roofing Atlanta contractors confirm that membrane solutions are popular due to their resistance to puncture, easy installation and and durability. TPO and EPDM are the two most common examples of membrane roofing materials.  TPO roofs usually come in white, grey and tan, which ensures superior heat reflectivity, while EPDM comes in black, which absorbs heat.
  • Built-up roofs – one of the most traditional solutions used on flat roofs, these structures consist of alternated layers of asphalt sheets and some kind of aggregate, such as mineral granules. The solution is popular due to the low costs and low maintenance needs.

Related Posts

Metal Roofing vs. TPO Roofing – Which Is Best for Atlanta?

metal roofing Atlanta

When it comes to the materials used for constructing commercial roofing in Atlanta, metal and TPO are the two most popular options. Here are some features that you should know about before choosing one of the two options over the other:

  • Roof life – according to manufacturers and to the studies performed by independent research groups, metal and TPO roofing materials differ considerably in terms of service life. High-end metal roofing Atlanta contractors confirm that structures built from zinc-coated aluminum can last for around six decades, however, the warranted service life of TPO membranes is usually around 25 years.
  • Wind resistance – TPO roofs being constructed from membranes that are fastened very tightly to the decking, they are considered to be stronger when exposed to high winds than metal roofs, especially when compared to standing seam metal roofs that more readily allow wind gusts to reach underneath.
  • Snow load – TPO roofs might have a hard time when exposed very thick layers of snow, metal being a better option for areas that get heavy snowing.
  • Maintenance needs – metal and TPO are both considered to be low maintenance materials. They both need to be regularly cleaned and inspected by a professional, but in most cases those maintenance visits will not reveal any major fault that needs expensive repairs.

 

Care and Maintenance Tips for TPO Roofing

A TPO roof membrane does not contain plasticizers or flame retardants that contain halogen, which results in a very high resistance to UV radiation and ozone. In addition, it is resistant to fungi, algae and chemicals. TPO membranes are also available in light colors, which ensure better protection against UV radiation and weather.

However, all these advantages do not mean that this type of roofing material does not need maintenance. According respected flat roofing Atlanta contractor, periodic maintenance is a must, in order to enjoy these benefits for as long as possible, and it refers, most often, to cleaning and checking up the roof.

flat roofing Atlanta

TPO membrane cleaning tips:

  1. Protect any area on the roof where water could enter when using pressurized water.
  2. Protect plants and exterior facades from the roof cleaning solution that might end up on them.
  3. Sweep the roof of leaves and twigs.
  4. Use low pressure water to clean and rinse the top layer of dust and dirt
  5. Use a soft brush or a soft floor mop with a cleaning solution consisting of warm water and a mild, non-abrasive and environmentally friendly detergent.
  6. Rinse the roof thoroughly.
  7. Inspect the membrane and make sure that no damage has occurred; any defects must be repaired as soon as possible by an Atlanta commercial roofer

Your local flat roofing Atlanta contractor can take care of all maintenance aspects and ensure your TPO roof is kept in tip-top shape.

Commercial Roofing Systems That Minimize Maintenance Costs

EPDM roofing Atlanta

If you’re searching for a type of roof you can just install and leave it there for a long time without maintenance, it’s important to know that there’s no such thing as a commercial roof that doesn’t require maintenance. However, some roofs are lower maintenance than others, and it’s definitely worth doing some research to find out which ones are the best.

Metal roofing is probably the type of flat roof that will require the least maintenance. A quality metal roofing system that is checked for damage and maintained roughly 1-2 times per year is likely to last many decades, and it will provide you with the type of long term resilience you want.

EPDM roofing has been talked about extensively in recent months and years, and it’s for good reason. This type of roof features a rubber membrane that can be quickly installed in layers, as well as easily repaired or reinforced using various types of coating. Dependable EPDM roofing Atlanta contractors affirm that EPDM roofs are known to last for up to five decades, and they don’t require much maintenance or too many repairs in the meantime.

Finally, just about every type of flat commercial roof that is fitted with superior quality coating will help minimize the costs of maintenance. Coating products are a very essential part of the roof’s overall resilience, and they can be responsible for extending the roof’s lifespan or shortening it, depending on whether you chose the right type of material for the local climate.