Is Rubber Roofing More Effective Than Metal Roofs for Commercial Applications?

Atlanta commercial roofing contractor

Your choice of roofing materials is a complex matter, and can be influenced by several important factors. For instance, you may be interested in finding out which solution is more efficient –rubber roofing or metal roofing? Here is some insight from an A+ BBB accredited Atlanta commercial roofing contractor.

For one thing, rubber roofing does not allow water to seep into your commercial roof too easily. There are several different types of rubber roofs, including EPDM, PVC, TPO and rubber shingles. As compared to metal roofing, rubber roofing has the advantage of being more affordable, less maintenance, fireproof, and also recyclable. But it tends to be less resistant in case of extreme weather.

Metal roofs are extremely durable and can be found in different colors, finishes, and textures. But as compared to rubber, metal does not look as good due to its rough texture. Installation and materials tend to cost more than in the case of rubber, and this type of roof can be more difficult to fix.

So, if you want a cheap and easy-to-install roof fix for your commercial applications, you should go for rubber. But if you need a roof which has to withstand hard weather conditions, metal roofing is the best option for you. And both of these options can be installed over an existing roof.

Related Posts

Which Types of Rubber Roofing Do Experts Recommend the Most?

Rubber roofing can represent a good alternative for asphalt shingles. Moreover, you can add a protective layer over your already existing roof. There are three main types of rubber roofing systems, including EPDM, PVC, TPO or rubber shingles.

The total costs for rubber roofing may depend on several factors, including the thickness of the rubber, if it is fully adhered or mechanically fastened, or in case ballast is also used. Top rubber roofing Atlanta specialists confirm that the costs are also influenced by the necessity to remove the already existing roof layers and if decking or insulating are required during the installation of your rubber roofing system.

EPDM, namely ethylene propylene diene terpolymer is a synthetic rubber material which is preferred by many homeowners due to the fact that it can be easily installed by using just one sheet, as opposed to other systems which require the installation of several different layers.

TPO is highly recommended in hot climates, because it can reduce energy costs. As compared to EPDM though, TPO requires more time and skills, and therefore the labor costs also tend to be higher than in the case of EPDM. But TPO is available in different colors. PVC is another good example of rubber roofing system which can be found in various colors.

Why Flat Roofing Is the Type of Roofing Most Atlanta Businesses Tend to Choose?

Atlanta commercial roofing contractor

Although, in the past, the best type of roof was considered to be the pitched roof, nowadays, flat roofs have become much more popular and not only when it comes to commercial or industrial buildings.

A full service Atlanta commercial roofing contractor confirms that the advantages of flat roofs make them very suitable for Atlanta climate, as well as for the needs of local business owners:

  • modern and aesthetic look
  • moderate construction costs
  • low maintenance costs
  • stability of the microclimate in the indoor space below the roof by preventing heat loss in winter and overheating in summer
  • reduced vulnerability to wind and hail
  • potential for a high ecological contribution
  • better use of the space inside the building
  • the possibility to use the roof for various purposes (installation of photovoltaic panels, arrangement of a green terrace, etc.)

The execution of a flat roof is demanding, especially when it comes to waterproofing. It is also essential to plan and execute the drainage system well and to ensure an impeccable vapor barrier to prevent excessive moisture build-up.

Proper waterproofing of a flat roof provides very good protection against water infiltration and moisture. Nowadays, waterproofing membranes are very efficient, resistant to exposure, and very elastic, ensuring a very long lifespan. That is why flat roofs are the type most Atlanta businesses tend to use.

How Are Drones Used to Perform Thermal Roof Inspections?

Inspecting commercial roofing in Atlanta can be quite difficult. That’s because, unlike residential roofing, commercial roofing can cover quite a big surface. Also, the materials used in commercial roofing differ from those used for residential purposes. That’s why a preferred commercial roofer Atlanta area professional uses drones that have special thermal vision cameras attached to them when doing these inspections.

commercial roofer Atlanta

When performing an inspection on a roof, the most important thing to look out for is heat build-up in certain areas of the roof. That means either the heat is escaping from the inside, leading to severe structural damage. Or, that can mean the heat is getting in, which can, in turn, mean the roofing system is faulty somewhere and in need of repairs.

Also, using a drone with thermal scanners to inspect commercial roofing in Atlanta can give both owners and contractors a much clearer idea about what material they need to use for their roofs. For instance, the materials used for the roof of a wood processing plant may not be the right material to use for an industrial car parts manufacturer.