Drone Thermal Roof Inspection Identifies Earliest Signs of Damage

Water infiltration is one of the most costly problems in the roofing industry. Water leaks through the roof can lead to the destruction of thermal insulation, loss of its thermal properties, damage to the structure, as well as material damage inside the building. All these cost building owners a lot of money, every year.

drone inspection

Completing a cost effective drone inspection brings significant benefits when it comes to detecting water leaks:

  • Quickly and accurately identifies the earliest signs of damage
  • Reduces heating and cooling costs of the building
  • Ensures the quality inspection in the case of the execution of new roofs or the rehabilitation of existing ones
  • Increases the lifespan of an existing roof
  • Documents roof issues before their warranty expires
  • Provides accurate data for proper budgeting
  • Reduces water damage to the building and the roof structure
  • It is a valuable tool for those who want to sell, buy or rent a building

How it works?

During the day, the sun emits energy that is absorbed by the roof; then, at night, the roof radiates the heat. Wet roof surfaces retain heat longer than dry ones. The infrared camera attached to the drone can detect this heat and “see” the surfaces where there is moisture in the roof system as being warmer.

Related Posts

Why Flat Roofing Is the Type of Roofing Most Atlanta Businesses Tend to Choose?

Atlanta commercial roofing contractor

Although, in the past, the best type of roof was considered to be the pitched roof, nowadays, flat roofs have become much more popular and not only when it comes to commercial or industrial buildings.

A full service Atlanta commercial roofing contractor confirms that the advantages of flat roofs make them very suitable for Atlanta climate, as well as for the needs of local business owners:

  • modern and aesthetic look
  • moderate construction costs
  • low maintenance costs
  • stability of the microclimate in the indoor space below the roof by preventing heat loss in winter and overheating in summer
  • reduced vulnerability to wind and hail
  • potential for a high ecological contribution
  • better use of the space inside the building
  • the possibility to use the roof for various purposes (installation of photovoltaic panels, arrangement of a green terrace, etc.)

The execution of a flat roof is demanding, especially when it comes to waterproofing. It is also essential to plan and execute the drainage system well and to ensure an impeccable vapor barrier to prevent excessive moisture build-up.

Proper waterproofing of a flat roof provides very good protection against water infiltration and moisture. Nowadays, waterproofing membranes are very efficient, resistant to exposure, and very elastic, ensuring a very long lifespan. That is why flat roofs are the type most Atlanta businesses tend to use.

Care and Maintenance Tips for TPO Roofing

A TPO roof membrane does not contain plasticizers or flame retardants that contain halogen, which results in a very high resistance to UV radiation and ozone. In addition, it is resistant to fungi, algae and chemicals. TPO membranes are also available in light colors, which ensure better protection against UV radiation and weather.

However, all these advantages do not mean that this type of roofing material does not need maintenance. According respected flat roofing Atlanta contractor, periodic maintenance is a must, in order to enjoy these benefits for as long as possible, and it refers, most often, to cleaning and checking up the roof.

flat roofing Atlanta

TPO membrane cleaning tips:

  1. Protect any area on the roof where water could enter when using pressurized water.
  2. Protect plants and exterior facades from the roof cleaning solution that might end up on them.
  3. Sweep the roof of leaves and twigs.
  4. Use low pressure water to clean and rinse the top layer of dust and dirt
  5. Use a soft brush or a soft floor mop with a cleaning solution consisting of warm water and a mild, non-abrasive and environmentally friendly detergent.
  6. Rinse the roof thoroughly.
  7. Inspect the membrane and make sure that no damage has occurred; any defects must be repaired as soon as possible by an Atlanta commercial roofer

Your local flat roofing Atlanta contractor can take care of all maintenance aspects and ensure your TPO roof is kept in tip-top shape.

Why Metal Roofing Is Popular for Commercial Buildings

The roof of commercial buildings with large indoor rooms requires better insulation, both thermal and acoustic, in order not to disturb the residential buildings in the area. Metal roofing is becoming more and more popular for commercial buildings because it meets these requirements and also brings a number of other advantages.

A commercial metal roof saves on energy costs

It is installed over a plywood deck, in large overlapping panels. The air between the panels and the flat roof provides extra insulation, which improves the thermal comfort inside the building. It is also helpful in reducing the noise.

Although there is a common misconception that metal roofing makes a building hotter in the summer, the reality is actually the opposite: a metal roof is reflective, so the heat is not absorbed.

Atlanta commercial roofing contractor

A commercial metal roof helps you save on maintenance & repairs

If you are the owner of a commercial building, you know how many expenses there are with it. But if you opt for metal roofing, you can reduce those related to roof repairs and upkeep, because a metal roof will withstand for decades, in any climate.

A commercial metal roof is one of the best long-term values

According to an Atlanta commercial roofing contractor builders recommend, many metal roof manufacturers offer warranties of up to 50 years. When it comes to flat commercial roofs, this increased longevity is only matched by EPDM membranes and it saves money, reduces waste and also enhances the resale value of your building.